Cold-Applied Polyurea
PLUSCOAT-600-15 is a two-component polyurea that can be applied without hot-spray equipment, combining the mechanical strength of polyurea with the simplicity of liquid application. On small…
What is Cold-Applied Polyurea
PLUSCOAT-600-15 is a two-component polyurea that can be applied without hot-spray equipment, combining the mechanical strength of polyurea with the simplicity of liquid application. On small and mid-sized jobs it removes the need to invest in spray plant.
On trafficked surfaces it stands out for impact and abrasion resistance. It meets the capillary water absorption and impact class requirements of EN 1504-2, so it can be specified as a certified solution in concrete protection projects.
Typical Values
Values apply to the standard system; figures for a line-specific formulation are agreed together.
| Chemistry | 2K polyurea |
|---|---|
| Elongation at break | 600% and above |
| Tensile strength | >9 N/mm² |
| Impact class | 3 (EN 1504-2 Class III) |
What It Delivers
No hot-spray equipment required
Meets EN 1504-2 capillary water absorption and impact class requirements
High tensile strength combined with high elongation
Abrasion resistance on trafficked surfaces
Where It Is Used
Car park floors
Trafficked areas
Terraces and roofs
Concrete protection and repair
More from Coatings & Waterproofing
COAT Series
Developed for construction and industrial applications, the Coat Series is built from…
Pure Polyurea
The PLUSOL C-501-xx series pure polyurea systems are two-component coating systems based on…
Hybrid Polyurea
The PLUSOL C-501-xx series hybrid polyurea systems are solvent-free and economical…
Let us specify the right system for your line
Tell us your application, line type and target density; our technical team will reply with a formulation proposal.