Discont. Panel (Cold Room Panel) Polyurethane Systems

   This type of sandwich panels, which have made rapid and important developments in many countries, are used in a wide variety of industrial facility buildings such as cold room warehouses, food industry, pharmaceutical factories, laboratories, etc.

PLUSOL R-103-xx & PLUSNATE R-100-01 raw materials used in this system are two-component systems and are injected between various surfaces such as two metals, polyester, aluminum in a fixed press resistant to high pressures with high pressure or low pressure injection machines.

In the formulation of these products, high-functional polyether polyol, special silicones and environmentally friendly new generation blowing gases are used; panels with high fluidity, high adhesion strength and high compressive strength values are obtained.

According to demand, it can be formulated as B1, B2 and B3 according to DIN 4102 standard.

According to the table above, our raw materials can be formulated to adapt to any thickness due to the change in panel thickness according to the temperature range.

According to the table above, our raw materials can be formulated to adapt to any thickness due to the change in panel thickness made according to the temperature range.

a. Thermal Resistance : 2.5 m2K/W

b. Compressive stress at 10% deformation: 300 kPa

c. Polyurethane Density (EN 1602) : 40-44 kg/m3

d. Heat Transmission Coefficient (EN 12667) : 0,021 -0,024 W/mK

e. Dimensional Stability (EN 13165) : Level DS(TH) 11

f. Flammability Class (EN 13501-1): Adjusted according to the request.

g. Water Absorption (EN ISO 354) : 2%

h. Closed Cell Rate (EN 14509) : 95

i. Vapor Diffusion Resistance (EN 12086) : 30-100

i. Temperature Resistance : -200 / + 110 °C

Please contact our company for technical details and further information.